Navigation

Install the Automation Agent with rpm Packages

Overview

Ops Manager Automation relies on an Automation Agent, which must be installed on every server that runs a monitored MongoDB deployment. The Automation Agents periodically poll Ops Manager to determine the goal configuration, deploy changes as needed, and report deployment status back to Ops Manager.

Automation Agents can run only on 64-bit architectures.

Use this procedure to install the agent on RHEL, CentOS, SUSE, Amazon Linux, and other systems that use rpm packages.

If you cannot install to a host using the rpm package, install the agent using an archive. Ensure this agent runs as the same system user as the MongoDB process.

Prerequisites

Server Networking Access

The hosts that serve the MongoDB deployments must:

  • Have full networking access to each other through their fully qualified domain names (FQDNs). Each host must be able to reach every other host through the FQDN.

    To find the FQDN for each host:

    • On Linux / macOS hosts, run the following command in the shell:

      hostname -f
      
    • On Windows hosts, run the following command in Powershell:

      net config workstation | findstr /C:"Full Computer name"
      
  • Resolve each FQDN to a unique IP address.

    Run the following domain internet groper (dig) shell command to find the host’s IP address.

    dig +short myip.opendns.com @resolver1.opendns.com
    

    Note

    dig is available for Microsoft Windows. Download and install the BIND tools from http://www.isc.org/downloads/

  • Set the Common Name or Subject Alternative Name value of any SSL certificates to the MongoDB host’s FQDN.

The network configuration must allow each Automation Agent to make a direct connection to every MongoDB deployment listed on the Deployment page. Ops Manager does not support port forwarding.

Installing to a Server that Already Runs MongoDB

If you install the Automation Agent to a server that is already running a MongoDB process, the agent must have:

  • Permission to stop the MongoDB process. The Automation Agent will restart the process using the agent’s own set of MongoDB binaries. If you had installed MongoDB with a package manager, use the same package manager to install the Automation Agent. This gives the agent the same owner as MongoDB.
  • Read and Write permissions on the MongoDB data directory and log directory.
  • Permission to stop, start, and update any existing Monitoring and Backup Agents.

Installing to a Server Before Installing MongoDB

If you deploy the Automation Agent to a server that does not have MongoDB installed, ensure the user that owns the Automation Agent has Read and Write permissions on the MongoDB data and log directories you plan to use.

Procedures

This section includes procedures for both installing and updating the Automation Agent.

Install the Automation Agent with an rpm Package

Installation Tip for Binding the Agent to a Group

You can also access install instructions in Ops Manager, including commands you can copy and paste: click Deployment, then Agents, then Downloads & Settings.

1

Download the latest version of the Automation Agent archive.

On a system shell, issue a curl command to download the rpm for the agent that works on your platform:

Note

Replace <OpsManagerHost:Port> with the hostname and port of your Ops Manager installation.

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 11, and Amazon Linux on x64 architecture:

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rpm
2

Install the Automation Agent Package

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

sudo rpm -U mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 11, and Amazon Linux on x64 architecture:

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rpm
3

Edit the automation-agent.config file.

In the directory where you installed the Automation Agent, edit the automation-agent.config file to either:

For SUSE 11+ deployments only, also configure the sslTrustedMMSServerCertificate setting.

Open the file with an editor. For example:

sudo vi /etc/mongodb-mms/automation-agent.config

Configure for a Specific Group

Update the following configuration keys:

  • For mmsGroupId, set to your GroupID.
  • For mmsApiKey, set to the group’s agent API key.
  • For mmsBaseUrl, set to the URL of the Ops Manager Application. Include the port number.
mmsGroupId=<Group ID>
mmsApiKey=<agent API key>
mmsBaseUrl=<application URL>

Do not configure the server pool settings: serverPoolKey, serverPoolPropertiesFile, serverPoolStateFile.

For SUSE 11+ deployments only, configure the sslTrustedMMSServerCertificate setting. Omit this step for other operating systems.

sslTrustedMMSServerCertificate=/etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem

Configure for a Server Pool

Update the following configuration keys:

  • For mmsBaseUrl, set to the URL of the Ops Manager Application. Include the port number.

  • For serverPoolKey, set to the Server Pool Key.

    To find the server pool key, in the Admin menu, go to Server Pool view and click on the Agent Configuration tab.

  • For serverPoolPropertiesFile, set to the full filepath of a file that contains server properties. Ensure the Automation Agent can read the file.

    The properties file contains key/value pairs of the form <property>=<value>. The Ops Manager Administrator decides on both the property names and values.

    Note

    Ensure that the properties file contains the desired property names and values before starting the Automation Agent on the server.

    Once the server is registered with the pool, changes to the properties file do not take effect until the server is first removed and the Automation Agent restarted.

  • For serverPoolStateFile, set to the full filepath of the file to be used by the Automation Agent.

    Ensure that the directory path to the file exists and the agent has read and write access to the directory. The file itself need not exist; however, if it does exist, the agent must have read and write access to the file.

mmsBaseUrl=<application URL>
serverPoolKey=somekeyabc123
serverPoolPropertiesFile=<path to server properties file>
serverPoolStateFile=<path to server state file>

Do not configure the group settings: mmsGroupId and mmsApiKey.

For SUSE 11+ deployments only, configure the sslTrustedMMSServerCertificate setting. Omit this step for other operating systems.

sslTrustedMMSServerCertificate=/etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem
4

Optional: Configure the Automation Agent to use a proxy server.

To configure the agent to connect to Ops Manager via a proxy server, you must specify the server in the httpProxy environment variable. In the /etc/mongodb-mms/automation-agent.config file, set the httpProxy value to the URL of to your proxy server:

httpProxy="http://proxy.example.com:9000"
5

Prepare the data directory.

The data directory stores MongoDB data and must be owned by the `mongod` user. For an existing MongoDB deployment, ensure the directory has the mongod user as owner. If no MongoDB deployment exists, create the directory and set the owner.

The following commands create a data directory and set the owner as the mongod user:

sudo mkdir /data
sudo chown mongod:mongod /data
6

Start the Automation Agent.

Issue the following command:

sudo service mongodb-mms-automation-agent start

Update the Automation Agent with an rpm Package

Important

The preferred way to update the Automation Agent is through the Ops Manager UI. If an Automation Agent is out of date, Ops Manager displays a warning on the Deployment page and provides a link to perform the update automatically.

If you use this procedure, you do not need to stop the agent. The update package automatically stops, unpacks, and then restarts the agent.

1

Download the latest version of the Automation Agent archive.

On a system shell, issue a curl command to download the rpm for the agent that works on your platform:

Note

Replace <OpsManagerHost:Port> with the hostname and port of your Ops Manager installation.

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 11, and Amazon Linux on x64 architecture:

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rpm
2

Install the Automation Agent Package

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

sudo rpm -U mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 11, and Amazon Linux on x64 architecture:

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rpm
3

Prepare the data directory.

The data directory stores MongoDB data and must be owned by the `mongod` user. For an existing MongoDB deployment, ensure the directory has the mongod user as owner. If no MongoDB deployment exists, create the directory and set the owner.

The following commands create a data directory and set the owner as the mongod user:

sudo mkdir /data
sudo chown mongod:mongod /data